Products

M280

A modular design, the M280 presents impressive workmanship that is both lightweight and ideal for building site conditions. Specifically its ease of handling and m-tec reliability make the M280 the mixing pump for all applications.

For instance, the M280 can process all inside and outside machine plasters with the utmost ease. Presenting an uncluttered array of controls free of superfluous switches, the M280 is a fascinating example of a practical mixing pump that is very easy to operate as well. Mounted on wheels configured specifically for building site conditions, it an be transported easily at any time. In addition, the M280 can also be hoisted by crane to each of its locations. If there is no crane available, the M280 can be dismantled into its constituent components in just a few simple steps.

Besides bagged materials, the M280 can also be charged from a silo (in conjunction with an m-tec silo, pneumatic conveying system, and filter hood).

M280: advantages
EasyClean
A cleaning slide separates reliably the wet and dry sections.With the mixing chamber swivelled off, the system can continue running in “two-hand jog mode” until the hopper is empty. The result is a fast, efficient, and residue free cleaning of the machine’s mixing and pumping sections.

EasyWork
The M280 presents an uncluttered array of controls for very easy operation

EasyUse
This makes easy work when machine products are processed.

EasyHandle
The duo-mix has the same connections as the M280 and so can be fitted as an accessory to its filter and feeding hoods.

M280: Facts
Areas of use and applications

All pumpable dry mortars like e.g.

  • Gypsum plasters
  • Lime gypsum plasters
  • Cement plasters
  • Lime plasters
  • Lime cement plasters 
  • Bricklaying mortars
  • Insulating plasters
  • Surface plasters
  • Reinforcing mortar and adhesive mortars
  • Adhesives
  • Thin skim fillers

Technical Data:

Output:

approx 22l/min (max 50l/min depending on worm pump) 

Conveying distance:*

 up to 40 m

Conveying height:*

 up to 20 m

Conveying pressure:*

 up to 30 bar

Drive motors

 

Conveyor section:

 1,1 kW, 400V, 50 Hz, 51 Upm

Mixing pump section:

 5,5 kW, 400V, 50 Hz, 400 Upm

Air compressor:

 0,9 kW, approx.250 l/min. 4 bar 

Electrical connection:

 400V, 50 Hz

Fuse

 25 A

Electrical connection:

 32 A, 5P, 6h

Connecting cable:

 5 x 4,0 mm²

Water supply:    

 3/4“ water hose with GEKA coupling, required water pressure min. 2.5 bar while the machine is running 

Dimensions:

 approx. 1545 x 636 x 1480 mm

Filling height for bagged materials:

 1100 mm

Weight:

 210 kg (w/o accessories + compressor)



* Depending on consistency, quality and composition of the material, pump model and condition, diameter and length of the delivery hose and also the pumping height of the material.